; ----------------------------------------------
; bdiGDB configuration for Keil STM32 Eval Board
; ----------------------------------------------
;

[INIT]
WGPR    13          0x20004ffc  ;set SP to top of internal SRAM
WM32    0xe0042004  0x00000001  ;DBGMCU_CR: set debug sleep mode
;


[TARGET]
CPUTYPE	    CORTEX-M3
CLOCK       2                   ;JTAG clock 8MHz
POWERUP     3000                ;start delay after power-up detected in ms
RESET	    HARD 100            ;assert reset for 100 ms
;RESET	    SOFT                ;assert reset via Reset Control Register
WAKEUP	    100                 ;wait after reset released
STARTUP     HALT                ;halt immediatelly at the reset vector
;STARTUP     RUN                 ;let boot ROM setup the system
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
BREAKMODE   SOFT                ;SOFT or HARD
MEMACCESS   AHB   1             ;memory access via AHB  (8 TCK's access delay)
;
SCANPRED    1 5                 ;count for TMC TAP
SCANSUCC    0 0
;
;


[HOST]
IP          151.120.25.119
PROMPT	    STM32>
FILE        E:/temp/dump16k.bin
FORMAT      BIN 0x20000000



[FLASH]
WORKSPACE   0x20000000          ;workspace in internal SRAM
CHIPTYPE    STM32F10
CHIPSIZE    0x20000
BUSWIDTH    16
FILE        E:/temp/dump16k.bin
FORMAT      BIN 0x08010000
ERASE       0x08010000 0x400 16


[REGS]
FILE    $regSTM32.def