OT–1 OTHER SYSTEM – CLOCK CLOCK BODY ELECTRICAL OTHER SYSTEM COMPONENTS CLOCK ASSEMBLY MULTI-DISPLAY ASSEMBLY UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY OT NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY B131355E02 OT–2 OTHER SYSTEM – CLOCK REMOVAL OT 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. 2. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (See page IP-5) 3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (See page IP-6) 4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See page IP-6) 5. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See page IP-6) 6. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (See page IP-6) 7. REMOVE MULTI-DISPLAY ASSEMBLY 8. REMOVE CLOCK ASSEMBLY (a) Detach the 2 claws and remove the clock. B074089E04 INSTALLATION 1. INSTALL CLOCK ASSEMBLY (a) Attach the 2 claws to install the clock. 2. INSTALL MULTI-DISPLAY ASSEMBLY 3. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (See page IP-12) 4. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See page IP-13) 5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See page IP-13) 6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (See page IP-13) 7. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (See page IP-13) 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL B074089E05 OTHER SYSTEM – CLOCK 9. OT–3 PERFORM INITIALIZATION (a) Perform initialization (see page IN-32). NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal. 10. CHECK SRS WARNING LIGHT (a) Check the SRS warning light (see page RS-31). OT OT–4 OTHER SYSTEM – TELLTALE LIGHT TELLTALE LIGHT BODY ELECTRICAL OTHER SYSTEM COMPONENTS NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (w/ JBL Sound System) FRONT PILLAR GARNISH RH FRONT PILLAR GARNISH CORNER PIECE RH FRONT PILLAR GARNISH LH FRONT PILLAR GARNISH CORNER PIECE LH D D OT D INSTRUMENT PANEL SUB-ASSEMBLY A 20 (204, 15) A INSTRUMENT CLUSTER FINISH PANEL END CLOCK ASSEMBLY MULTI-DISPLAY ASSEMBLY N*m (kgf*cm, ft.*lbf) : Specified torque B126622E03 OT–5 OTHER SYSTEM – TELLTALE LIGHT INSTRUMENT PANEL HOLE COVER GLOVE COMPARTMENT DOOR INSTRUMENT PANEL HOLE COVER UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY OT INSTRUMENT PANEL CUSHION NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY E E LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY GLOVE COMPARTMENT DOOR ASSEMBLY B126623E04 OT–6 OTHER SYSTEM – TELLTALE LIGHT TELLTALE LIGHT ASSEMBLY INSTRUMENT PANEL SUB-ASSEMBLY B132483E01 OT OTHER SYSTEM – TELLTALE LIGHT OT–7 REMOVAL 2 Claws 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. 2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY (a) Remove the instrument panel (see page IP-5). 3. REMOVE TELLTALE LIGHT ASSEMBLY (a) Disconnect the connector. (b) Detach the 2 claws and remove the telltale light. B074056E04 INSTALLATION 2 Claws 1. INSTALL TELLTALE LIGHT ASSEMBLY (a) Attach the 2 claws to install the telltale light. (b) Connect the connector. 2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (a) Install the instrument panel (see page IP-11). 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 4. PERFORM INITIALIZATION (a) Perform initialization (see page IN-32). NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal. 5. CHECK SRS WARNING LIGHT (a) Check the SRS warning light (see page RS-31). B074056E05 OT OT–8 OTHER SYSTEM – POWER OUTLET SOCKET POWER OUTLET SOCKET BODY ELECTRICAL OTHER SYSTEM COMPONENTS OT POWER OUTLET SOCKET COVER POWER OUTLET SOCKET ASSEMBLY B136398E01 OTHER SYSTEM – POWER OUTLET SOCKET OT–9 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation. 2. REMOVE POWER OUTLET SOCKET ASSEMBLY (a) Detach the claw to remove the power outlet socket. I038883E02 OT OT–10 OTHER SYSTEM – POWER OUTLET SOCKET INSTALLATION OT 1. INSTALL POWER OUTLET SOCKET ASSEMBLY (a) Align the power outlet socket and power outlet socket cover. Insert them from the front side into the vehicle body and install the power outlet socket. 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 3. PERFORM INITIALIZATION (a) Perform initialization (see page IN-32). NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal. OT–10 OTHER SYSTEM – REAR POWER OUTLET SOCKET REAR POWER OUTLET SOCKET BODY ELECTRICAL OTHER SYSTEM COMPONENTS OT POWER OUTLET SOCKET COVER REAR POWER OUTLET SOCKET ASSEMBLY B136399E01 OTHER SYSTEM – REAR POWER OUTLET SOCKET OT–11 REMOVAL 1. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (a) Detach the claw to remove the rear power outlet socket. I038884E02 OT OT–12 OTHER SYSTEM – REAR POWER OUTLET SOCKET INSTALLATION OT 1. INSTALL REAR POWER OUTLET SOCKET ASSEMBLY (a) Align the rear power outlet socket assembly and power outlet socket cover. Insert them from the front side into the vehicle body and install the rear power outlet socket assembly. 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 3. PERFORM INITIALIZATION (a) Perform initialization (see page IN-32). NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.