; bdiWind configuration file for Sandpoint 7400 evaluation system
; ---------------------------------------------------------------
;
[INIT]
; init core register
WREG    MSR             0x00000000      ;clear MSR

; init memory controller (based on DINK32)
WM32    0xFEC00000      0x80000080      ;select MSAR1
WM32    0xFEE00000      0x00204060      ;
WM32    0xFEC00000      0x84000080      ;select MSAR2
WM32    0xFEE00000      0x80a0c0e0      ;
WM32    0xFEC00000      0x90000080      ;select MEAR1
WM32    0xFEE00000      0x1f3f5f7f      ;
WM32    0xFEC00000      0x94000080      ;select MEAR2
WM32    0xFEE00000      0x9fbfdfff      ;
WM32    0xFEC00000      0xa0000080      ;select MBEN
WM8     0xFEE00000      0x03            ;
WM32    0xFEC00000      0xa0000080      ;select MPM
WM8     0xFEE00003      0x32            ;
WM32    0xFEC00000      0xf0000080      ;select MCCR1
WM32    0xFEE00000      0x0000e175      ;do not set MEMGO
WM32    0xFEC00000      0xf4000080      ;select MCCR2
WM32    0xFEE00000      0xcd044004      ;
WM32    0xFEC00000      0xf8000080      ;select MCCR3
WM32    0xFEE00000      0x00004078      ;
WM32    0xFEC00000      0xfc000080      ;select MCCR4
WM32    0xFEE00000      0x39323235      ;
WM32    0xFEC00000      0xf0000080      ;select MCCR1
WM32    0xFEE00000      0x0000e975      ;now set MEMGO
;
WM32    0xFEC00000      0x78000080      ;select EUMBBAR
WM32    0xFEE00000      0x000000fc      ;Embedded utility memory block at 0xFC000000
;
WM32    0xFEC00000      0xa8000080      ;select PICR1
WM32    0xFEE00000      0x901014ff      ;enable flash write (Flash on processor bus)
;
; define maximal transfer size
;TSZ1    0xFF800000      0xFFFFFFFF      ;ROM space (only for PCI boot ROM)
;TSZ4    0xFF800000      0xFFFFFFFF      ;ROM space (only for Local bus flash)


[TARGET]
CPUTYPE     7400                ;the CPU type (603EV,750,8240,8260,7400)
JTAGCLOCK   0                   ;use 16 MHz JTAG clock
WORKSPACE   0x00000000	        ;workspace in target RAM for fast download
BDIMODE     AGENT     	        ;the BDI working mode (LOADONLY | AGENT | GATEWAY)
BREAKMODE   SOFT      	        ;<AGENT> SOFT or HARD, HARD uses PPC hardware breakpoint
VECTOR      CATCH               ;<AGENT> catch unhandled exceptions
DCACHE      FLUSH	        ;data cache flushing (FLUSH | NOFLUSH)

MEMBASE     0         	        ;<AGENT> base of target memory
MEMSIZE     0x01000000          ;<AGENT> size of target memory
POOLBASE    0x00F00000          ;<AGENT> base of host controlled target memory
POOLSIZE    0x00100000          ;<AGENT> size of host controlled target memory

[HOST]
IP          151.120.25.115
FILE        E:\tornado\target\proj\sp7400_agt\default\vxworks
FORMAT      ELF
LOAD        MANUAL              ;<AGENT> load VxWorks code MANUAL or AUTO after reset

[FLASH]
; Am29LV800BB on local processor bus (RCS0)
; set PPMC7400 switch SW2-1 OFF => ROM on Local bus
; enable flash write in PICR1 (see INIT part)
CHIPTYPE    AM29BX8     ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
CHIPSIZE    0x100000    ;The size of one flash chip in bytes (e.g. Am29LV800BB = 0x100000)
BUSWIDTH    8           ;The width of the flash memory bus in bits (8 | 16 | 32 | 64)
WORKSPACE   0x00000000  ;workspace in SDRAM
FILE        D:\abatron\bdi360\cop\pro\sp7400_rom0.sss  ;The file to program
ERASE       0xFFF00000  ;erase sector 0 of flash
ERASE       0xFFF04000  ;erase sector 1 of flash
ERASE       0xFFF06000  ;erase sector 2 of flash
ERASE       0xFFF08000  ;erase sector 3 of flash
ERASE       0xFFF10000  ;erase sector 4 of flash
ERASE       0xFFF20000  ;erase sector 5 of flash
ERASE       0xFFF30000  ;erase sector 6 of flash
ERASE       0xFFF40000  ;erase sector 7 of flash
ERASE       0xFFF50000  ;erase sector 8 of flash
ERASE       0xFFF60000  ;erase sector 9 of flash
ERASE       0xFFF70000  ;erase sector 10 of flash

[REGS]
DMM1        0xFC000000                  ;Embedded utility memory base address
IMM1        0xFEC00000  0xFEE00000      ;configuration registers at byte offset 0
IMM2        0xFEC00000  0xFEE00001      ;configuration registers at byte offset 1
IMM3        0xFEC00000  0xFEE00002      ;configuration registers at byte offset 2
IMM4        0xFEC00000  0xFEE00003      ;configuration registers at byte offset 3
FILE        d:\abatron\bdi360\cop\tornado\bdi\mpc107.def