; bdiGDB configuration file for Alchemy Pb1000 board
; --------------------------------------------------
;
[INIT]
;
WCP0    12          0x00000000  ;disable interrupts
;
; Setup Static Bus Controller
WM32    0xB4001000  0x00000000  ;RCS0 Configuration
WM32    0xB4001008  0x11F83FE0  ;RCS0 Address
WM32    0xB4001010  0x00000000  ;RCS1 Configuration
WM32    0xB4001014  0x0002018A  ;RCS1 Timing
WM32    0xB4001018  0x11803E40  ;RCS1 Address
;
; Setup SDRAM Controller
WM32    0xB4000004  0x00552229  ;CS1 mode configuration
WM32    0xB4000008  0x00552229  ;CS2 mode configuration
WM32    0xB4000010  0x001003F8  ;CS1 address, 32MB at 0x00000000
WM32    0xB4000014  0x001023F8  ;CS2 address, 32MB at 0x02000000
WM32    0xB4000018  0x74000C30  ;Program refresh (disabled)
WM32    0xB400001C  0x00000000  ;Precharge all banks
WM32    0xB4000020  0x00000000  ;Issue two auto refreshes
WM32    0xB4000020  0x00000000  ;Issue two auto refreshes
WM32    0xB4000018  0x76000C30  ;Enable refresh
WM32    0xB4000028  0x00000023  ;CS1 set mode
WM32    0xB400002C  0x00000023  ;CS2 set mode
;
; Setup TLB
;WTLB    0x00000600  0x01F80017  ;System Flash 2 x 4MB, uncached DVG
;
; Invalidate Caches
IVIC    4           128         ;Invalidate IC, 4 way, 128 sets
IVDC    4           128         ;Invalidate DC, 4 way, 128 sets


[TARGET]
JTAGCLOCK   0                   ;use 16 MHz JTAG clock
CPUTYPE     AU1000 		;the used target CPU type
ENDIAN      BIG                 ;target is big endian
RESET       JTAG                ;the reset type (NONE, JTAG, HARD)
WORKSPACE   0xA0000080	        ;workspace in target RAM for fast download
BDIMODE     AGENT   	        ;the BDI working mode (LOADONLY | AGENT)
BREAKMODE   SOFT        	;SOFT or HARD, HARD uses PPC hardware breakpoints
STEPMODE    JTAG                ;JTAG, HWBP or SWBP
VECTOR      CATCH               ;catch unhandled exceptions
REGLIST     STD CP0             ;send also CP0 registers to GDB


[HOST]
IP          151.120.25.119
FILE        E:\cygwin\home\bdidemo\mips\fibo.x
FORMAT      ELF
;FILE        E:\cygwin\home\bdidemo\mips\vmlinus
;FORMAT      ELF
LOAD        MANUAL      ;load code MANUAL or AUTO after reset


[FLASH]


[REGS]
DMM1	0xB4000000      ;memory controller base address
DMM2	0xB0400000      ;interrupt controller 0 base address
DMM3	0xB1800000      ;interrupt controller 1 base address
FILE	E:\cygwin\home\bdidemo\mips\regau1k.def