; bdiGDB configuration file for IQ80321 board
; -------------------------------------------
;
[INIT]
WCP15   0x2001      0x00000001  ;Disable Write Buffer Coalescing
WCP15   0x010F      0x000020C1  ;Enable CP0, CP6, CP7 and CP13 access
;
; Init DRAM
WM32    0xffffe508  0xA0000000  ;SDBR: Set SDRAM Base Address
WM32    0xffffe50c  0x00000014  ;SBR0: 1 bank 128 MB
WM32    0xffffe510  0x00000014  ;SBR1: 1 bank 128 MB
WM32    0xffffe504  0x00000000  ;SDCR: 64bit / unbuffered
WM32    0xffffe550  0x00000000  ;RFR : Disables Refresh Counter
WM32    0xffffe500  0x00000005  ;SDIR: nop
WM32    0xffffe500  0x00000004  ;SDIR: precharge-all
WM32    0xffffe500  0x00000006  ;SDIR: extended-mode-register-set
WM32    0xffffe500  0x00000002  ;SDIR: CAS Latency = 2
WM32    0xffffe500  0x00000004  ;SDIR: precharge-all
WM32    0xffffe500  0x00000007  ;SDIR: auto-refresh
WM32    0xffffe500  0x00000007  ;SDIR: auto-refresh
WM32    0xffffe500  0x00000000  ;SDIR: CAS Latency = 2
WM32    0xffffe500  0x0000000f  ;SDIR: normal operation
WM32    0xffffe550  0x00000300  ;RFR : Enable Refresh Counter
;

[TARGET]
CPUTYPE         IOP321          ;the target CPU type
JTAGCLOCK       1               ;use 16 MHz JTAG clock
;DBGHANDLER      0x00000000      ;debug handler base address
DBGHANDLER      0xFFFF0800      ;debug handler base address
;DBGHANDLER      0x01FEF800      ;debug handler base address
;DBGHANDLER      0xFE000800      ;debug handler base address
ENDIAN          LITTLE          ;memory model (LITTLE | BIG)
BREAKMODE       SOFT            ;SOFT or HARD
;VECTOR          CATCH 0xDE      ;trap all vectors
VTABLO          0xe59ff018      ;Use fixed vectors "ldr pc, [pc, #18]"
VTABHI          0xffffffff      ;Do not update relocated vector table

[HOST]
IP              151.120.25.119
;FILE            E:\cygwin\home\bdidemo\xscale\vxworks
;FORMAT          BIN 0xA0020000
FILE            E:\cygwin\home\bdidemo\xscale\redboot_ROM.bin
FORMAT          BIN 0xA0000000
LOAD            MANUAL          ;load code code MANUAL or AUTO after reset

[FLASH]
WORKSPACE   0xa0000000  ;workspace in target RAM for fast programming algorithm
CHIPTYPE    STRATAX16   ;Flash type
CHIPSIZE    0x800000    ;The size of one flash chip in bytes
BUSWIDTH    16          ;The width of the flash memory bus in bits (8 | 16 | 32)
FILE        E:\cygwin\home\bdidemo\xscale\redboot_ROM.bin
FORMAT      BIN 0x00080000
ERASE       0x00080000  ;erase sector 4
ERASE       0x000A0000  ;erase sector 5
ERASE       0x000C0000  ;erase sector 6
ERASE       0x000E0000  ;erase sector 7
ERASE       0x00100000  ;erase sector 8
ERASE       0x00120000  ;erase sector 9
ERASE       0x00140000  ;erase sector 10
ERASE       0x00160000  ;erase sector 11
ERASE       0x00180000  ;erase sector 12
ERASE       0x001A0000  ;erase sector 13
ERASE       0x001C0000  ;erase sector 14
ERASE       0x001E0000  ;erase sector 15

[REGS]
FILE	        E:\cygwin\home\bdidemo\xscale\reg80321.def