;Minimal bdiGDB configuration file for T1040
;-------------------------------------------
;
;
[INIT]
; empty init list


[TARGET]
; common parameters
POWERUP     5000                ;start delay after power-up detected in ms
JTAGCLOCK   16000000            ;16 MHz JTAG clock
RESET       HARD  1000          ;assert reset for 1 seconds
WAKEUP      500                 ;give reset time to complete
;
; Core#0 parameters (active core after reset)
#0 CPUTYPE      T1040 0 0       ;Core0 / SOC0
#0 STARTUP      HALT            ;halt at the reset vector (this halts all cores !!!)
#0 BREAKMODE    HARD            ;SOFT or HARD, HARD uses PPC hardware breakpoint
#0 STEPMODE     HWBP            ;ICMP or HWBP, HWBP uses a hardware breakpoint
;
; RCW Override for SOC#0 assigned to CoreID#0
;#0 RCWSRC       0x09e           ;0_1001_1110 : hard coded RCW


[HOST]
#0 PROMPT       T1040#0>
;

[REGS]
FILE        $regT1040.def
;