; bdiGDB configuration file for MPC8272ADS board
; ----------------------------------------------
;
[INIT]
; init core register
WREG    MSR             0x00001002      ;MSR  : ME,RI
WM32	0x000101A8	0x7e000000	;IMMR : internal space @ 0x7e000000
WM32	0x7e010004	0xFFFFFFC3	;SYPCR: disable watchdog
;
; init memory controller
WM32	0x7e010104	0xFF800876	;OR0: Flash 8MB, CS early negate, 11 w.s., Timing relax
WM32	0x7e010100	0x7E801801	;BR0: Flash @0x7E800000, 32bit, no parity

[TARGET]
CPUTYPE     8272        ;the CPU type
JTAGCLOCK   1           ;use 16 MHz JTAG clock
POWERUP     7000        ;start delay after power-up detected in ms
BOOTADDR    0xfff00100  ;boot address used for start-up break
WORKSPACE   0x7e000000	;workspace in target RAM for fast download
;MEMDELAY    2000        ;additional memory access delay

[HOST]
IP          151.120.25.119
FILE        E:\cygwin\home\bdidemo\mpc8260\vxworks
FORMAT      ELF
LOAD        MANUAL      ;load code MANUAL or AUTO after reset
PROMPT      8272>	;new prompt for Telnet
DUMP        E:\temp\dump.bin

[FLASH]
CHIPTYPE    I28BX8     	; Flash type
CHIPSIZE    0x200000	; Single chip size (2 Mbyte)
BUSWIDTH    32		; total width for the whole SIMM
WORKSPACE   0x7e000000	;workspace in target RAM for fast download
FILE        E:\temp\dump256k.bin
FORMAT      BIN 0x7e900000

ERASE       0x7e900000  ;erase sector  4 of flash SIMM
ERASE       0x7e940000  ;erase sector  5 of flash SIMM
ERASE       0x7e980000  ;erase sector  6 of flash SIMM
ERASE       0x7e9C0000  ;erase sector  7 of flash SIMM


[REGS]
DMM1        0x7e000000
FILE        E:\cygwin\home\bdidemo\mpc8260\reg8272.def