;bdiGDB configuration file for programming MPC5534 internal flash
; ---------------------------------------------------------------
;
;
; WTLB <epn> <rpn>:
;
; The <epn> parameter defines the effective page number, space, size and WIMG flags (MAS1/MAS2):
;
; +--------------------+----+--+------+
; |         EPN        |SIZE|PS|VWIMGE|    P = IPROT
; +--------------------+----+--+------+    S = TS
;           20            4   2    6
;
; The <rpn> parameter defines the real page number and access rights (MAS3):
;
; +--------------------+--+----+------+
; |         RPN        |--|UUUU|XXWWRR|
; +--------------------+--+----+------+
;           22               4     6
;
;
[INIT]
;
WTLB    0xFFF0058A  0xFFF0003F  ;Bridge B: 0xfff00000 -> 0xfff00000,   1MB, --I-G-
WTLB    0xC3F0058A  0xC3F0003F  ;Bridge A: 0xc3f00000 -> 0xc3f00000,   1MB, --I-G-
WTLB    0x4000048A  0x4000003F  ;Int.SRAM: 0x40000000 -> 0x40000000, 256KB, --I-G-
WTLB    0x0000078A  0x0000003F  ;Flash   : 0x00000000 -> 0x00000000,  16MB, --I-G-
;
FILL    0x40000000  0x10000     ;init ECC-SRAM
;
; Speed-up system clock
WM32    0xC3F80000  0x01000000  ;FMPLL_SYNCR: MFD=2,RFD=0 -> fsys = 48MHz
;
; Lock/Unlock Flash Blocks for Erase/Programming
WM32    0xC3F88004  0xA1A11111  ; FLASH_LMLR : unlock register
WM32    0xC3F88004  0x001CFFFF  ; FLASH_LMLR : lock/unlock blocks
WM32    0xC3F8800C  0xC3C33333  ; FLASH_SLMLR: unlock register
WM32    0xC3F8800C  0x001CFFFF  ; FLASH_SLMLR: lock/unlock blocks
WM32    0xC3F88008  0xB2B22222  ; FLASH_HLR  : unlock register
WM32    0xC3F88008  0x0FFFFFF0  ; FLASH_HLR  : lock/unlock blocks
;

[TARGET]
CPUTYPE     5534 		;the used target CPU type
;JTAGCLOCK   1                   ;BDI2000: use 8 MHz JTAG clock
JTAGCLOCK   3                   ;BDI3000: use 8 MHz JTAG clock
POWERUP     2000                ;start delay after power-up detected in ms
WAKEUP      100                 ;give reset time to complete
STARTUP     HALT
BREAKMODE   HARD      	        ;SOFT or HARD, HARD uses PPC hardware breakpoint
STEPMODE    HWBP                ;JTAG or HWBP, HWPB uses one or two hardware breakpoints
MEMACCESS   NEXUS               ;select ONCE or NEXUS memory access mode

[HOST]
IP          151.120.25.112      ;Windows host
PROMPT      PROG5534>

[FLASH]
WORKSPACE   0x40001000          ;workspace at 0x40001000
CHIPTYPE    H7F                 ;MPC5534 internal flash
FILE        E:/temp/dump512k.bin
FORMAT      BIN 0x00040000
ERASE       0x00000003  MID     ;erase 2 blocks in Mid  Space
ERASE       0x0000000F  HIGH    ;erase 4 blocks in High Space

[REGS]
FILE    $reg5534.def