; bdiGDB configuration file for Cavium CN3860
; -------------------------------------------
;
; This configuration uses the monitor setup the board
;
[INIT]
;
; Invalidate Caches
;#0 IVIC                            ;Invalidate IC
;#0 IVDC                            ;Invalidate DC
;
; Setup TLB
;#0 WTLB    0xC000000000000600   0x00000017  ;Map 0xc000... -> 0x0000...


[TARGET]
; common parameters
POWERUP     2000                ;power-up delay 2 seconds
JTAGCLOCK   1                   ;use 16 MHz JTAG clock
;
;======================================================
; !!!! defines the cores numbers without any holes !!!!
;======================================================
;
; Core#0 parameters (active core after reset)
#0 CPUTYPE     CNMIPS           ;the used target CPU type
#0 RESET       JTAG             ;don't use RESET HARD
#0 ENDIAN      BIG              ;target is big endian
#0 JTAGDELAY   5                ;40 TCK's access delay
#0 STARTUP     STOP 5000        ;STOP mode is used to let the monitor init the system
#0 WORKSPACE   0xA0000080       ;workspace in target RAM for fast download
#0 BREAKMODE   HARD             ;SOFT or HARD
#0 SCANPRED    15  75           ;select last core in scan chain
#0 SCANSUCC    0   0
;
; Core#1 parameters
#1 CPUTYPE     CNMIPS
#1 RESET       NONE
#1 ENDIAN      BIG
#1 JTAGDELAY   5
#1 STARTUP     WAIT             ;CPU is held in reset
#1 BREAKMODE   HARD
#1 SCANPRED    14  70
#1 SCANSUCC    1   5
;
; Core#2 parameters
#2 CPUTYPE     CNMIPS
#2 RESET       NONE
#2 ENDIAN      BIG
#2 JTAGDELAY   5
#2 STARTUP     WAIT             ;CPU is held in reset
#2 BREAKMODE   HARD
#2 SCANPRED    13  65
#2 SCANSUCC    2   10
;
; Core#3 parameters
#3 CPUTYPE     CNMIPS
#3 RESET       NONE
#3 ENDIAN      BIG
#3 JTAGDELAY   5
#3 STARTUP     WAIT             ;CPU is held in reset
#3 BREAKMODE   HARD
#3 SCANPRED    12  60
#3 SCANSUCC    3   15
;
; Core#4 parameters
#4 CPUTYPE     CNMIPS
#4 RESET       NONE
#4 ENDIAN      BIG
#4 JTAGDELAY   5
#4 STARTUP     WAIT             ;CPU is held in reset
#4 BREAKMODE   HARD
#4 SCANPRED    11  55
#4 SCANSUCC    4   20
;
; Core#5 parameters
#5 CPUTYPE     CNMIPS
#5 RESET       NONE
#5 ENDIAN      BIG
#5 JTAGDELAY   5
#5 STARTUP     WAIT             ;CPU is held in reset
#5 BREAKMODE   HARD
#5 SCANPRED    10  50
#5 SCANSUCC    5   25
;
; Core#6 parameters
#6 CPUTYPE     CNMIPS
#6 RESET       NONE
#6 ENDIAN      BIG
#6 JTAGDELAY   5
#6 STARTUP     WAIT             ;CPU is held in reset
#6 BREAKMODE   HARD
#6 SCANPRED    9   45
#6 SCANSUCC    6   30
;
; Core#7 parameters
#7 CPUTYPE     CNMIPS
#7 RESET       NONE
#7 ENDIAN      BIG
#7 JTAGDELAY   5
#7 STARTUP     WAIT             ;CPU is held in reset
#7 BREAKMODE   HARD
#7 SCANPRED    8   40
#7 SCANSUCC    7   35
;
; Core#8 parameters
#8 CPUTYPE     CNMIPS
#8 RESET       NONE
#8 ENDIAN      BIG
#8 JTAGDELAY   5
#8 STARTUP     WAIT             ;CPU is held in reset
#8 BREAKMODE   HARD
#8 SCANPRED    7   35
#8 SCANSUCC    8   40
;
; Core#9 parameters
#9 CPUTYPE     CNMIPS
#9 RESET       NONE
#9 ENDIAN      BIG
#9 JTAGDELAY   5
#9 STARTUP     WAIT             ;CPU is held in reset
#9 BREAKMODE   HARD
#9 SCANPRED    6   30
#9 SCANSUCC    9   45
;
; Core#10 parameters
#10 CPUTYPE    CNMIPS
#10 RESET      NONE
#10 ENDIAN     BIG
#10 JTAGDELAY  5
#10 STARTUP    WAIT             ;CPU is held in reset
#10 BREAKMODE  HARD
#10 SCANPRED   5   25
#10 SCANSUCC   10  50
;
; Core#11 parameters
#11 CPUTYPE    CNMIPS
#11 RESET      NONE
#11 ENDIAN     BIG
#11 JTAGDELAY  5
#11 STARTUP    WAIT             ;CPU is held in reset
#11 BREAKMODE  HARD
#11 SCANPRED   4   20
#11 SCANSUCC   11  55
;
; Core#12 parameters
#12 CPUTYPE    CNMIPS
#12 RESET      NONE
#12 ENDIAN     BIG
#12 JTAGDELAY  5
#12 STARTUP    WAIT             ;CPU is held in reset
#12 BREAKMODE  HARD
#12 SCANPRED   3   15
#12 SCANSUCC   12  60
;
; Core#13 parameters
#13 CPUTYPE    CNMIPS
#13 RESET      NONE
#13 ENDIAN     BIG
#13 JTAGDELAY  5
#13 STARTUP    WAIT             ;CPU is held in reset
#13 BREAKMODE  HARD
#13 SCANPRED   2   10
#13 SCANSUCC   13  65
;
; Core#14 parameters
#14 CPUTYPE    CNMIPS
#14 RESET      NONE
#14 ENDIAN     BIG
#14 JTAGDELAY  5
#14 STARTUP    WAIT             ;CPU is held in reset
#14 BREAKMODE  HARD
#14 SCANPRED   1   5
#14 SCANSUCC   14  70
;
; Core#15 parameters
#15 CPUTYPE    CNMIPS
#15 RESET      NONE
#15 ENDIAN     BIG
#15 JTAGDELAY  5
#15 STARTUP    WAIT             ;CPU is held in reset
#15 BREAKMODE  HARD
#15 SCANPRED   0   0
#15 SCANSUCC   15  75
;
;======================================================


[HOST]
IP          151.120.25.112

;#0  FILE        E:\temp\dump1024k.bin
;#0  FORMAT      BIN 0xA0020000
#0  FILE        E:\temp\test.out
#0  FORMAT      BIN 0x81000000

#0  PROMPT  cnMIPS#0>
#1  PROMPT  cnMIPS#1>
#2  PROMPT  cnMIPS#2>
#3  PROMPT  cnMIPS#3>
#4  PROMPT  cnMIPS#4>
#5  PROMPT  cnMIPS#5>
#6  PROMPT  cnMIPS#6>
#7  PROMPT  cnMIPS#7>
#8  PROMPT  cnMIPS#8>
#9  PROMPT  cnMIPS#9>
#10 PROMPT  cnMIPS#10>
#11 PROMPT  cnMIPS#11>
#12 PROMPT  cnMIPS#12>
#13 PROMPT  cnMIPS#13>
#14 PROMPT  cnMIPS#14>
#15 PROMPT  cnMIPS#15>


[FLASH]
; only to test execution of target code
WORKSPACE   0xA0001000          ;workspace in SDRAM
CHIPTYPE    AM29BX16            ;Flash type
CHIPSIZE    0x00200000          ;The size of one flash chip in bytes
BUSWIDTH    16                  ;The width of the flash memory bus in bits
FILE        E:\temp\dump16k.bin
FORMAT      BIN 0xA0300000


[REGS]
;used for all cores unless overridden
DMM1	0xFF300000      ;DSU base address
DMM2	0x80000000_0    ;xkphys segment
FILE	$regCNMIPS.def