; ========================================================
; bdiGDB configuration for STMicro STM32F4-Discovery board
; ========================================================
;
; Info about the JTAG clock frequency:
; ------------------------------------
; BDI2000:
;   0=Adaptive,
;   1=16MHz, 2=8MHz, 3=4MHz,
;   4= 1MHz, 5=500kHz, 6=200kHz, 7=100kHz, 8=50kHz,
;   9=20kHz, 10=10kHz, 11=5kHz, 12=2kHz, 13=1kHz
; BDI3000:
;   0=Adaptive,
;   1=32MHz, 2=16MHz, 3=11MHz, 4=8MHz, 5=5MHz, 6=4MHz,
;   7=1MHz, 8=500kHz, 9=200kHz, 10=100kHz, 11=50kHz,
;   12=20kHz, 13=10kHz, 14=5kHz, 15=2kHz, 16=1kHz,
;

[INIT]
WGPR    13      0x2000fffc      ;set SP to internal SRAM
;


[TARGET]
CPUTYPE	    CORTEX-M4
;CLOCK       2                   ;BDI2000: JTAG clock 8MHz
CLOCK       4                   ;BDI3000: JTAG clock 8MHz
POWERUP     2000                ;start delay after power-up detected in ms
RESET	    HARD 100            ;assert reset for 100 ms
WAKEUP	    100                 ;wait after reset released
STARTUP     HALT                ;halt immediately at the reset vector
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
BREAKMODE   SOFT                ;SOFT or HARD
MEMACCESS   AHB   2             ;memory access via AHB  (16 TCK's access delay)
;
;SCANPRED    1 5                 ;count for TMC TAP        (remove this line for SWD)
;SCANSUCC    0 0                 ;no device after ARM core (remove this line for SWD)


[HOST]
PROMPT	    STM32F4>
FILE        E:/temp/dump16k.bin
FORMAT      BIN 0x20000000


[FLASH]
WORKSPACE   0x20000000          ;workspace in internal SRAM
CHIPTYPE    STM32F4
CHIPSIZE    0x100000            ;1 MB FLASH
BUSWIDTH    32                  ;x32 Program/Erase parallelism (2.7V - 3.6V)

;FILE        E:/Cygwin/home/bdidemo/arm11/stm32f4.bin
;FORMAT      BIN 0x08000000
;ERASE       0x08000000                  ;erase 16 kB sector
;ERASE       0x08004000                  ;erase 16 kB sector

FILE        E:/temp/dump512k.bin
FORMAT      BIN 0x08008000
ERASE       0x08008000                  ;erase 16 kB sector
ERASE       0x0800C000                  ;erase 16 kB sector
ERASE       0x08010000                  ;erase 64 kB sector
ERASE       0x08020000 0x20000 7        ;erase all 7 128 kB sectors


[REGS]
FILE    $regSTM32F4.def