; ====================================
; bdiGDB configuration for Kinetis K70
; ====================================
;
; Info about the JTAG clock frequency:
; ------------------------------------
; BDI2000:
;   0=Adaptive,
;   1=16MHz, 2=8MHz, 3=4MHz,
;   4= 1MHz, 5=500kHz, 6=200kHz, 7=100kHz, 8=50kHz,
;   9=20kHz, 10=10kHz, 11=5kHz, 12=2kHz, 13=1kHz
; BDI3000:
;   0=Adaptive,
;   1=32MHz, 2=16MHz, 3=11MHz, 4=8MHz, 5=5MHz, 6=4MHz,
;   7=1MHz, 8=500kHz, 9=200kHz, 10=100kHz, 11=50kHz,
;   12=20kHz, 13=10kHz, 14=5kHz, 15=2kHz, 16=1kHz,
;
;

[INIT]
WGPR    13          0x20007ffc  ;set SP to top of internal SRAM
;
; for flash programming disable caches
WM32    0x4001F008  0x00080000  ;FMC_PFB23CR: disable cache
WM32    0x4001F004  0x00080000  ;FMC_PFB01CR: invaliate and disable cache
;
; Disable Watchdog
WGPR    0           0x40052000  ;WDOG register base address
WGPR    1           0xC520      ;unlock code A
WGPR    2           0xD928      ;unlock code B
WGPR    3           0x01D2      ;New value for WDOG_STCTRLH
WM16    0x20000000  0x81c1      ;strh r1, [r0, #14]
WM16    0x20000002  0x81c2      ;strh r2, [r0, #14]
WM16    0x20000004  0x8003      ;strh r3, [r0, #0]
WM16    0x20000006  0xbe00      ;bkpt	0x0000
EXEC    0x20000000              ;execute disable code
;

[TARGET]
CPUTYPE	    CORTEX-M4
;CLOCK       3                   ;BDI3000: JTAG clock 11MHz
CLOCK       2                   ;BDI2000: JTAG clock 8MHz
POWERUP     3000                ;start delay after power-up detected in ms
RESET	    HARD 100            ;assert reset for 100 ms
;RESET	    SOFT                ;assert reset via Reset Control Register
;RESET	    NONE                ;don't assert and observe reset
WAKEUP	    100                 ;wait after reset released
STARTUP     HALT                ;halt immediatelly at the reset vector
;STARTUP     IDLE                ;ignore until attached
;STARTUP     RUN                 ;let boot ROM setup the system
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
BREAKMODE   SOFT                ;SOFT or HARD
MEMACCESS   AHB   1             ;memory access via AHB  (8 TCK's access delay)
;


[HOST]
PROMPT	    K70>
FILE        E:/temp/dump16k.bin
FORMAT      BIN 0x20000000


[FLASH]
CHIPTYPE    FTFE
WORKSPACE   0x20000000
;FILE        E:/temp/dump16k.bin
;FORMAT      BIN 0x00080000
;ERASE       0x00080000 0x1000 4  ;erase 4 x 4kB sectors
;
FILE        E:\Cygwin\home\bdidemo\arm11\k70f120m.bin
FORMAT      BIN 0x00000000
ERASE       0x00000000 BLOCK  ;erase the 256kB block
ERASE       0x00040000 BLOCK  ;erase the 256kB block
;


[REGS]
FILE    $regK70.def