; bdiGDB configuration for Motorola M9328MX1ADS board
; ---------------------------------------------------
;
[INIT]
;
; Initialize DragonBall MX1 ADS Rev 0.1 board when using JTAG
; so SRAM and SDRAM are downloadable
;
WM32    0x0021b000  0x2f00ac03	;Select CLKO mux to output HCLK(BCLK)
WM32    0x0021b000  0x2f008403  ;48MHz System Clock
WM32    0x00220000  0x00002000  ;CS0 - boot flash, 32 wait states, 8-bit
WM32    0x00220004  0x11110301
WM32    0x00220008  0x00000a00  ;CS1 - SRAM, 10 wait states, 32-bit
WM32    0x0022000c  0x11110601
WM32    0x00220020  0x00000a00  ;CS4 - External UART, 10 wait states, 8-bit
WM32    0x00220024  0x11110301
;
;Init SDRAM 16Mx16x2 IAM0 CS2 CL2
;
WM32    0x00221000  0x92120200  ;Set Precharge Command
WM32    0x08200000  0x00000000  ;Issue Precharge all Command
WM32    0x00221000  0xa2120200  ;Set AutoRefresh Command
WM32    0x08000000  0x00000000  ;Issue AutoRefresh Command
WM32    0x08000000  0x00000000
WM32    0x08000000  0x00000000
WM32    0x08000000  0x00000000
WM32    0x08000000  0x00000000
WM32    0x08000000  0x00000000
WM32    0x08000000  0x00000000
WM32    0x08000000  0x00000000
WM32    0x00221000  0xb2120200  ;Set Mode Register
WM32    0x08111800  0x00000000  ;Issue Mode Register Command, Burst Length = 8
WM32    0x00221000  0x82124200  ;Set to Normal Mode
;

[TARGET]
CPUTYPE     ARM920T
;CLOCK       1                   ;BDI2000: JTAG clock 16MHz
CLOCK       2                   ;BDI3000: JTAG clock 16MHz
WAKEUP      3000                ;because of slow rising reset line
RESET       HARD 1000           ;beause of heavy capacitive load on reset line
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
BREAKMODE   SOFT 0xDFFFDFFF     ;SOFT or HARD, ARM / Thumb break code
;VECTOR      CATCH 0x1f          ;catch D_Abort, P_Abort, SWI, Undef and Reset
;SIO         7 9600              ;TCP port for serial IO
;DCC         7                   ;TCP port for DCC I/O

[HOST]
IP          151.120.25.119
;FILE        E:\cygwin\home\bdidemo\arm\vxworks
;FORMAT      BIN 0x12000000
FILE        E:\cygwin\home\demo\mx1\fibo.x
FORMAT      ELF
LOAD        MANUAL      ;load VxWorks code MANUAL or AUTO after reset

[FLASH]


[REGS]
FILE	E:\cygwin\home\bdidemo\arm\regMX1.def