; bdiGDB configuration for Pepercon FA526 board
; ---------------------------------------------
;
[INIT]
;WREG    CPSR        0x000000d3  ;set superviser mode
;WGPR    15          0x00000000  ;set PC = 0
;WCP15   0x0001      0x00000078  ;CP15 Control : disable caches
;
WM32    0x90100010  0x00080000  ;AHB slave 4 Base/Size Register
WM32    0x90100018  0x100b0000  ;AHB slave 6 Base/Size Register
WM32    0x90200000  0x10000031  ;Memory Bank 0 Configuration Register
WM32    0x90200004  0x000ff3ff  ;Memory Bank 0 Timing Register
WM32    0x90300000  0x00033623  ;SDRAM Timing Parameter 0
WM32    0x90300004  0x00480180  ;SDRAM Timing Parameter 1
WM32    0x90300008  0x00001125  ;SDRAM Configuration Register 1
WM32    0x9030000c  0x10        ;SDRAM: Pre-Charge
WM32    0x9030000c  0x04        ;SDRAM: Set-Mode
WM32    0x9030000c  0x08        ;SDRAM: Refresh
WM32    0x90300010  0x00001100  ;External Bank0 Base/Size Register
WM32    0x90300034  0x18        ;Flush Request Register
WM32    0x90100088  0x00000001  ;Interrupt Control Register


[TARGET]
CPUTYPE     FA526
;CLOCK       1                   ;BDI2000: JTAG clock 16MHz
CLOCK       2                   ;BDI3000: JTAG clock 16MHz
RESET       HARD 1000           ;assert reset for 1 second
WAKEUP      200                 ;give reset time to complete
;STARTUP     STOP 2000           ;let U-boot setup the system
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
VECTOR      CATCH 0x1f          ;catch D_Abort, P_Abort, SWI, Undef and Reset
;BREAKMODE   SOFT 0xDFFFDFFF     ;SOFT or HARD, ARM / Thumb break code
BREAKMODE    HARD


[HOST]
IP          151.120.25.119
FILE        E:\cygwin\home\bdidemo\arm\vxworks
FORMAT      COFF
LOAD        MANUAL      ;load VxWorks code MANUAL or AUTO after reset
PROMPT      FA526>


[FLASH]
WORKSPACE   0x00200002  ;workspace in target RAM for fast programming algorithm
CHIPTYPE    AM29BX16     ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
;CHIPTYPE    STRATAX16     ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
;CHIPTYPE    I28BX16     ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
CHIPSIZE    0x1000000    ;The size of one flash chip in bytes (e.g. AM29F040 = 0x80000)
BUSWIDTH    16          ;The width of the flash memory bus in bits (8 | 16 | 32)
FILE        e:\temp\dump16k.bin
FORMAT      BIN 0x1000


[REGS]
FILE	$regFA526.def