; bdiGDB configuration file for Evaluator-7T board
; ------------------------------------------------
;
[INIT]
WM32    0x03FF0000  0x07FFFFA0	;SYSCFG: no cache,SRAM=0x03FE0000,SFR=0x03FF0000
WM32    0x03FF3010  0x0000003E  ;EXTDBWTH: DSR0=16, DSR1/2=32
WM32    0x03FF3014  0x18860030  ;ROMCON0: Flash, 0x01800000-0x0187FFFF, 4 wait
WM32    0x03FF3018  0x00400010  ;ROMCON1: SRAM, 0x00000000-0x0003FFFF, 2 wait
WM32    0x03FF301C  0x00801010  ;ROMCON2: SRAM, 0x00040000-0x0007FFFF, 2 wait
WM32    0x03FF303C  0x00008360  ;REFEXTCON: Ext.I/O @ 0x03600000
;
WGPR    11          0x00000020  ;set frame pointer to free RAM
WM32    0x00000020  0x00000028	;dummy stack frame
;
RM32    0x00000000              ;read 32bit
RM16    0x00000000              ;read 16bit
RM8     0x00000000              ;read  8bit
;
;WBIN    0x00001000  E:\cygwin\home\bdidemo\arm\eval7t.cfg
;


[TARGET]
CPUTYPE     ARM7TDMI
;CLOCK       1                   ;BDI2000: JTAG clock 16MHz
CLOCK       2                   ;BDI3000: JTAG clock 16MHz
RESET       HARD 101
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
VECTOR      CATCH               ;catch unhandled exceptions
BDIMODE     AGENT               ;the BDI working mode (LOADONLY | AGENT)
BREAKMODE   SOFT 0xDFFFDFFF     ;SOFT or HARD, ARM / Thumb break code
;BREAKMODE   HARD                ;SOFT or HARD, ARM / Thumb break code
;DCC         7                   ;DCC I/O via TCP port 7
;SIO         8023 19200              ;TCP port for serial IO

SCANINIT    r1:t1:w1000:t0:w1000:       ;assert reset and toggle TRST
SCANINIT    w1000000:                   ;wait 1 seconds
SCANINIT    i4=0e:d32=00000000
;
SCANPOST    w10000:r0:w10000            ;release reset

;SCANPRED    11 64            ;JTAG devices connected before this core
;SCANSUCC    11 66            ;JTAG devices connected after this core

[HOST]
IP          151.120.25.119
;FILE        E:\cygwin\home\bdidemo\arm\vxworks
;FORMAT      COFF
FILE        E:\cygwin\home\demo\pid7t\fibo.x
;FILE        E:\cygwin\home\demo\armcustom\customflash.x
FORMAT      ELF
LOAD        MANUAL    ;load VxWorks code MANUAL or AUTO after reset

[FLASH]
WORKSPACE   0x00001000  ;workspace in target RAM for fast programming algorithm
CHIPTYPE    AT49X16     ;Flash type is SST39VF400
;CHIPTYPE    DCCX8
CHIPSIZE    0x80000     ;The size of one flash chip in bytes (e.g. AM29F010 = 0x20000)
BUSWIDTH    16          ;The width of the flash memory bus in bits (8 | 16 | 32)
FILE        E:\cygwin\home\bdidemo\arm\test0.elf  ;The file to program
FORMAT      BIN 0x01840000
;FILE        E:\cygwin\home\bdidemo\arm\eval7t.cfg
;FORMAT      BIN 0x10000
ERASE       0x01840000 BLOCK  ;erase a 64kB block
ERASE       0x01850000 BLOCK  ;erase a 64kB block
ERASE       0x01860000 BLOCK  ;erase a 64kB block
ERASE       0x01870000 BLOCK  ;erase a 64kB block

;WORKSPACE   0x00000100
;CHIPTYPE    I28BX16
;CHIPSIZE    0x10000
;BUSWIDTH    16
;FILE        E:\temp\pat0080.bin
;FORMAT      BIN 0x00010000