; bdiGDB configuration file for AT91EB55 board
; --------------------------------------------
;
[INIT] ; Commands executed everytime target comes out of reset
WM32    0xFFE00020  0x00000001  ;Cancel reset remapping
WM32    0xFFFFF124  0xFFFFFFFF  ;disable all interrupts


[TARGET] ; Defines target specific values
CPUTYPE     ARM7TDMI
;CLOCK       3                   ;BDI2000: JTAG clock 4MHz
CLOCK       6                   ;BDI3000: JTAG clock 4MHz
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
;VECTOR      CATCH               ;catch unhandled exceptions
BREAKMODE   SOFT 0xDFFFDFFF     ;SOFT or HARD, ARM / Thumb break code
;BREAKMODE   SOFT 0xef180000     ;SOFT or HARD (X-Tools V1.0 break code)

[HOST]
IP          10.62.1.72
FILE        led_swing.bin
FORMAT      BIN
LOAD        MANUAL      ;<AGENT> load code MANUAL or AUTO after reset
PROMPT      AT91-BDI>       ;new Telnet prompt
DUMP        dump.bin

[FLASH]
;WORKSPACE   0x00000000  ;workspace in target RAM for fast programming algorithm
CHIPTYPE    AT49X16     ;Flash type is Atmel AT49BV1604 in 16bit mode
CHIPSIZE    0x200000    ;The size of one flash chip in bytes (e.g. AM29F010 = 0x20000)
BUSWIDTH    16          ;The width of the flash memory bus in bits (8 | 16 | 32)
FILE        led_swing.bin  ;The file to program
ERASE       0x01000000 CHIP ;erase chip

[REGS]
FILE	reg55800.def